Tee, Pipe Fittings

There are three female openings in a ‘T’ formed pipe tee.
There are straight pipe tees which have the same size openings.
Equal tee make them open of various size and two openings of the same size.
There are sterile equal tees which are utilised as a part of waste lines.
These sort of equal tees have a bent branch which is intended for a wipe outfitting. They are utilised to avoid hindrance of waste.
An equal tee has dragged to attach the fitting to a divider or stud.
An equal tee utilises pressure fittings on two or more finishes.
An equal tee has a strong opening. This opening is utilised as a part of conjunction with a strong fitting for a get out an opening on a drain pipe.

Equal Tee Dimensions

NOMINAL PIPE SIZE	OUTSIDE DIAMETER mm	CENTER TO END	LENGTH
Inch.	OD	C	M
1/2	21.3	25	25
3/4	26.7	29	29
1	33.4	38	38
1 1/4	42.2	48	48
1 1/2	48.3	57	57
2	60.3	64	64
2 1/2	73	76	76
3	88.9	86	86
3 1/2	101.6	95	95
4	114.3	105	105
5	141.3	124	124
6	168.3	143	143
8	219.1	178	178
10	273.1	216	216
12	323.9	254	254
14	355.6	279	279
16	406.4	305	305
18	457.2	343	343
20	508	381	381
22	559	419	419
24	610	432	432
26	660	495	495
28	711	521	521
30	762	559	559
32	813	597	597
34	864	635	635
36	914	673	673
38	965	711	711
40	1016	749	749
42	1067	762	711
44	1118	813	762
46	1168	851	800
48	1219	889	838

Reducing Tee is a T-shaped pipe fitting with two outlets that cut at 90 degrees to the main line. These tees are available with a combination of diverse outlet sizes.

FEATURES OF REDUCING TEE

There are straight pipe tees which have the same size openings.
Reducing tee make them open of various size and two openings of the same size.
There are sterile reducing tees which are utilised as a part of waste lines.
These sort of reducing tees have a bent branch which is intended for a wipe outfitting. They are utilised to avoid hindrance of waste.
A reducing tee has dragged to attach the fitting to a divider or stud.
A reducing tee utilises pressure fittings on two or more finishes.
A reducing tee has a strong opening. This opening is utilised as a part of conjunction with a strong fitting for a get out an opening on a drain pipe.

Reducing Tee Dimensions

NOMINAL PIPE SIZE	OUTSIDE DIAMETER		CENTER TO END
Inch	D	P	C	M
1/2 x 3/8	21.3	17.1	25	25
1/2 x 1/4	21.3	13.7	25	25
3/4 x 1/2	26.7	21.3	29	29
3/4 x 3/8	26.7	17.1	29	29
1 x 3/4	33.4	26.7	38	38
1 x 1/2	33.4	21.3	38	38
1 1/4 x 1	42.2	33.4	48	48
1 1/4 x 3/4	42.2	26.7	48	48
1 1/4 x 1/2	42.2	21.3	48	48
1 1/2 x 1 1/2	48.3	42.2	57	57
1 1/2 x 1	48.3	33.4	57	57
1 1/2 x 3/4	48.3	26.7	57	57
1 1/2 x 1/2	48.3	21.3	57	57
2 x 1 1/2	60.3	48.2	64	60
2 x 1 1/4	60.3	42.2	64	57
2 x 1	60.3	33.4	64	51
2 x 3/4	60.3	26.7	64	44
2 1/2 x 2	73	60.3	76	70
2 1/2 x 1 1/2	73	48.3	76	67
2 1/2 x 1 1/4	73	42.2	76	64
2 1/2 x 1	73	33.4	76	57
3 x 2 1/2	88.9	73	86	83
3 x 2	88.9	60.3	86	76
3 x 1 1/2	88.9	48.3	86	73
3 x 1 1/4	88.9	42.2	86	70
3 1/2 x 3	101.6	88.9	95	92
3 1/2 x 21/2	101.6	73	95	89
3 1/2 x 2	101.6	60.3	95	83
3 1/2 x 1 1/2	101.6	48.3	95	79
4 x 3 1/2	114.3	101.6	105	102
4 x 3	114.3	88.9	105	98
4 x 2 1/2	114.3	73	105	95
4 x 2	114.3	60.3	105	89
4 x 1 1/2	114.3	48.3	105	86
5 x 4	141.3	114.3	124	117
5 x 3 1/2	141.3	101.6	124	114
5 x 3	141.3	88.9	124	111
5 x 2 1/2	141.3	73	124	108
5 x 2	141.3	60.3	124	105
6 x 5	168.3	141.3	143	137
6 x 4	168.3	114.3	143	130
6 x 3 1/2	168.3	101.6	143	127
6 x 3	168.3	88.9	143	124
6 x 2 1/2	168.3	73	143	121
8 x 6	219.1	168.3	178	168
8 x 5	219.1	141.3	178	162
8 x 4	219.1	114.3	178	156
8 x 3 1/2	219.1	101.6	178	152
10 x 8	273.1	219.1	216	203
10 x 6	273.1	168.1	216	194
10 x 5	273.1	141.3	216	191
10 x 4	273.1	114.3	216	184
12 x 10	323.9	273.1	254	241
12 x 8	323.9	219.1	254	229
12 x 6	323.9	168.3	254	219
12 x 5	323.9	141.3	254	216
14 x 12	355.6	323.9	279	270
14 x 10	355.6	273.1	279	257
14 x 8	355.6	219.1	279	248
14 x 6	355.6	168.3	279	238
16 x 14	406.4	355.6	305	305
16 x 12	406.4	323.9	305	295
16 x 10	406.4	273.1	305	283
16 x 8	406.4	219.1	305	273
16 x 6	406.4	168.3	305	264
18 x 16	457	406.4	343	330
18 x 14	457	355.6	343	330
18 x 12	457	323.9	343	321
18 x 10	457	273.1	343	308
18 x 8	457	219.1	343	298
20 x 18	508	457	381	368
20 x 16	508	406.4	381	356
20 x 14	508	355.6	381	356
20 x 12	508	323.9	381	346
20 x 10	508	273.1	381	333
20 x 8	508	219.1	381	324
22 x 20	559	508	419	406
22 x 18	559	457	419	394
22 x 16	559	406.4	419	381
22 x 14	559	355.6	419	381
22 x 12	559	323.9	419	371
24 x 10	559	273.1	419	359
24 x 22	610	559	432	432
24 x 20	610	508	432	432
24 x 18	610	457	432	419
24 x 16	610	406.4	432	406
24 x 14	610	355.6	432	406
24 x 12	610	323.9	432	397
24 x 10	610	273.1	432	384

Pattern	Weld	Seamless
Nominal size	1/2”-48” (DN15-DN1200)	1/2”-20” (DN15-DN500)
Wall thickness	2~100mm	2~50mm
Bend radius	SCH5S-SCH160 ,XXS	SCH5-SCH160

TEE
-tee-reduce
-calss-2000-tee-stright-scoket-weld
-calss-3000-tee-stright-scoket-weld
-calss-6000-tee-stright-scoket-weld
-calss-9000-tee-stright-scoket-weld
-
-tee-stright-equal
-calss-2000-tee-reduce-thread
-calss-3000-tee-reduce-thread
-calss-6000-tee-reduce-thread