①Small and medium-sized steel, wire rods, steel bars, medium-diameter steel pipes, steel wires and wire ropes, etc., can be stored in a well-ventilated material shed, but must be topped and bottomed.
②Some small steels, thin steel plates, steel strips, silicon steel sheets, small-diameter or thin-walled steel pipes, various cold-rolled and cold-drawn steels, and high-priced, corrosive metal products can be stored in storage.
③The site or warehouse for storing anti-corrosion large-diameter steel pipe products should be located in a clean place with unobstructed drainage, away from factories and mines that produce harmful gases or dust. Weeds and all debris should be removed on the field, and the steel should be kept clean.
④Large section steel, rails, steel plates, large diameter steel pipes, forgings, etc. can be stacked in the open air.
⑤Do not stack with acid, alkali, salt, cement and other corrosive materials in the warehouse. Different types of steel should be stacked separately to prevent confusion and contact corrosion.
⑥The warehouse should be selected according to the geographical conditions. Generally, an ordinary closed warehouse is adopted, that is, a warehouse with a roof, a wall, tight doors and windows, and a ventilation device.
⑦The warehouse is required to be ventilated on sunny days, shut down to prevent moisture on rainy days, and always maintain a suitable storage environment.
②Some small steels, thin steel plates, steel strips, silicon steel sheets, small-diameter or thin-walled steel pipes, various cold-rolled and cold-drawn steels, and high-priced, corrosive metal products can be stored in storage.
③The site or warehouse for storing anti-corrosion large-diameter steel pipe products should be located in a clean place with unobstructed drainage, away from factories and mines that produce harmful gases or dust. Weeds and all debris should be removed on the field, and the steel should be kept clean.
④Large section steel, rails, steel plates, large diameter steel pipes, forgings, etc. can be stacked in the open air.
⑤Do not stack with acid, alkali, salt, cement and other corrosive materials in the warehouse. Different types of steel should be stacked separately to prevent confusion and contact corrosion.
⑥The warehouse should be selected according to the geographical conditions. Generally, an ordinary closed warehouse is adopted, that is, a warehouse with a roof, a wall, tight doors and windows, and a ventilation device.
⑦The warehouse is required to be ventilated on sunny days, shut down to prevent moisture on rainy days, and always maintain a suitable storage environment.