The following issues should be noted during the installation of stainless steel plates:
1. Handling and storage: Stainless steel plates should avoid scratches and collisions during handling and storage, and protective films can be used to protect the surface. At the same time, stainless steel plates should not be placed in a humid environment for a long time to prevent rust.
2. Installation ground: The installation ground of stainless steel plates requires flatness, and there should be no steep or uneven places to avoid deformation of stainless steel plates. Before installation, the ground should be inspected and trimmed.
3. Installation process: During the installation process, care should be taken to avoid deformation of stainless steel plates. If the installation pressure is too high, it may cause blistering and cracking on the surface of the stainless steel plate, and in severe cases, it will also affect the anti-corrosion function. Therefore, be careful during installation to avoid excessive installation pressure.
4. Welding and anti-rust treatment: For stainless steel plates that need to be welded, attention should be paid to whether the interface between the welding keel and the main keel is coated with anti-corrosion paint. After welding, the welding parts of the pipes and angle irons should also be polished and coated with anti-rust paint to increase the service life of the stainless steel plates.
5. Material selection: When choosing stainless steel plates, you should weigh economy and quality. Thinner stainless steel plates may be cheaper, but may have some defects during use. Therefore, you should consider economy and service life comprehensively when choosing.
6. Safety and sanitation: The construction site should meet safety and sanitation requirements, and construction workers should wear protective equipment. At the same time, fire prevention and explosion prevention measures should be taken during the installation of stainless steel plates.
7. Construction steps and quality inspection: Carry out construction according to the design drawings, paying attention to flatness and aesthetics. After completing the construction, carry out corresponding inspections and tests to ensure that the installation quality meets the requirements.
How to prevent corrosion of stainless steel plates?
1. Avoid direct contact with other metal materials, especially metals that are prone to electrochemical reactions, such as iron, copper, etc. Avoid long-term contact with wet metals to prevent electrochemical corrosion.
2. Avoid contact with media containing chloride ions, because chloride ions will reduce the corrosion resistance of stainless steel plates and cause corrosion.
3. During the use of stainless steel plates, avoid using detergents containing acid, alkaline or salt to avoid corrosion on the stainless steel surface.
4. Clean the surface of stainless steel plates regularly to prevent dirt accumulation and corrosion. You can use mild detergents and soft cloths for cleaning, and avoid using brushes or abrasives to avoid scratching the stainless steel surface.
5. When using stainless steel plates, avoid excessive temperatures to avoid affecting the performance of stainless steel plates. Especially for welding or heating treatment of stainless steel plates, the temperature needs to be controlled to avoid deformation or performance.
6. During the use of stainless steel plates, pay attention to avoid mechanical damage and avoid collision with sharp objects or hard objects to avoid scratches or deformation.
In summary, many aspects need to be paid attention to during the installation of stainless steel plates, including handling and storage, installation ground, installation process, welding and anti-rust treatment, material selection, safety and sanitation, construction steps and quality inspection, etc. Only by paying attention to these issues can the installation quality and service life of stainless steel plates be ensured.
Read more: Steel Sheet Piles
1. Handling and storage: Stainless steel plates should avoid scratches and collisions during handling and storage, and protective films can be used to protect the surface. At the same time, stainless steel plates should not be placed in a humid environment for a long time to prevent rust.
2. Installation ground: The installation ground of stainless steel plates requires flatness, and there should be no steep or uneven places to avoid deformation of stainless steel plates. Before installation, the ground should be inspected and trimmed.
3. Installation process: During the installation process, care should be taken to avoid deformation of stainless steel plates. If the installation pressure is too high, it may cause blistering and cracking on the surface of the stainless steel plate, and in severe cases, it will also affect the anti-corrosion function. Therefore, be careful during installation to avoid excessive installation pressure.
4. Welding and anti-rust treatment: For stainless steel plates that need to be welded, attention should be paid to whether the interface between the welding keel and the main keel is coated with anti-corrosion paint. After welding, the welding parts of the pipes and angle irons should also be polished and coated with anti-rust paint to increase the service life of the stainless steel plates.
5. Material selection: When choosing stainless steel plates, you should weigh economy and quality. Thinner stainless steel plates may be cheaper, but may have some defects during use. Therefore, you should consider economy and service life comprehensively when choosing.
6. Safety and sanitation: The construction site should meet safety and sanitation requirements, and construction workers should wear protective equipment. At the same time, fire prevention and explosion prevention measures should be taken during the installation of stainless steel plates.
7. Construction steps and quality inspection: Carry out construction according to the design drawings, paying attention to flatness and aesthetics. After completing the construction, carry out corresponding inspections and tests to ensure that the installation quality meets the requirements.
How to prevent corrosion of stainless steel plates?
1. Avoid direct contact with other metal materials, especially metals that are prone to electrochemical reactions, such as iron, copper, etc. Avoid long-term contact with wet metals to prevent electrochemical corrosion.
2. Avoid contact with media containing chloride ions, because chloride ions will reduce the corrosion resistance of stainless steel plates and cause corrosion.
3. During the use of stainless steel plates, avoid using detergents containing acid, alkaline or salt to avoid corrosion on the stainless steel surface.
4. Clean the surface of stainless steel plates regularly to prevent dirt accumulation and corrosion. You can use mild detergents and soft cloths for cleaning, and avoid using brushes or abrasives to avoid scratching the stainless steel surface.
5. When using stainless steel plates, avoid excessive temperatures to avoid affecting the performance of stainless steel plates. Especially for welding or heating treatment of stainless steel plates, the temperature needs to be controlled to avoid deformation or performance.
6. During the use of stainless steel plates, pay attention to avoid mechanical damage and avoid collision with sharp objects or hard objects to avoid scratches or deformation.
In summary, many aspects need to be paid attention to during the installation of stainless steel plates, including handling and storage, installation ground, installation process, welding and anti-rust treatment, material selection, safety and sanitation, construction steps and quality inspection, etc. Only by paying attention to these issues can the installation quality and service life of stainless steel plates be ensured.
Read more: Steel Sheet Piles
